ÖØ¿ÚζSM

On the extent of fracture toughness transfer from 1D/2D nanomodified epoxy matrices to glass fibre composites

Domun, Nadiim, Paton, Keith R., Blackman, Bamber R. K., Kaboglu, Cihan, Vahid, Samireh, Zhang, Tao, Dear, John P., Kinloch, Anthony J. and Hadavinia, Homayoun, 2020, Journal of Materials Science (55), 11, pp 4717-4733

NiAl–TiC–Al[sub]2O[sub]3 composite formed by self-propagation high-temperature synthesis process : combustion behaviour, microstructure, and properties

Riyadia, Tri Widodo Besar, Zhang, Tao, Marchant, Denis and Zhu, Xiaomeng, 2019, Journal of Alloys and Compounds (805), pp 104-112

Numerical simulation of TiO[sub]2 nanoparticle synthesis by flame spray pyrolysis

Torabmostaedi, Hosein and Zhang, Tao, 2018, Powder Technology (329), pp 426-433

Thermal, mechanical, and shape-memory properties of nanorubber-toughened, epoxy-based shape-memory nanocomposites

Wei, Hong-Qiu, Chen, Ye, Zhang, Tao, Liu, Liwu, Qiao, Jinliang, Liu, Yanju and Leng, Jinsong, 2018, Journal of Applied Polymer Science (135), 6, pp 45780

Enhancement of fracture toughness of epoxy nanocomposites by combining nanotubes and nanosheets as fillers

Domun, Nadiim, Paton, Keith R., Hadavinia, Homayoun, Sainsbury, Toby, Zhang, Tao and Mohamud, Hibaaq, 2017, Materials (10), 1179

Improving the fracture toughness properties of epoxy using graphene nanoplatelets at low filler content

Domun, Nadiim, Hadavinia, Homayoun, Zhang, Tao, Liaghat, Gholamhossein, Vahid, Samireh, Spacie, Chris, Paton, Keith R. and Sainsbury, Toby, 2017, Nanocomposites (3), 3, pp 85-96

Process control for thermal-spray deposition of thermoset coatings using computer simulation

Xu, Hu, Bao, Yuqing, Gawne, David T. and Zhang, Tao, 2016, Progress in Organic Coatings (101), pp 407-415

Influence of nanorubber toughening on the tensile deformation and tensile fatigue behaviour of a carbon fibre-reinforced epoxy composite

Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspian, Ian and Scarpa, Fabrizio, 2016, Journal of Composite Materials (50), 19, pp 2633-2645

Toughening of carbon fibre reinforced polymer composites with rubber nanoparticles for advanced industrial applications

Ozdemir, N. G., Zhang, T., Aspian, I, Scarpa, F, Hadavinia, H. and Song, Y, 2016, eXPRESS Polymer Letters (10), 5, pp 394-407

Glass fibre reinforced polymer composites toughened with acrylonitrile butadiene nanorubber

Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspin, Ian and Scarpa, Fabrizio, 2016, Composites Part B Engineering (88), pp 182-188

Improving the fracture toughness and the strength of epoxy using nanomaterials : a review of the current status

Domun, Nadiim, Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G.H. and Vahid, S., 2015, Nanoscale (7), 23, pp 10294-10329

Rheological properties, cure characteristics, and morphology of acrylonitrile-based nanorubber modified epoxy

Ozdemir, Nazli G., Zhang, Tao, Hadavinia, Homayoun, Aspin, Ian and Wang, Jian, 2015, Journal of Applied Polymer Science (132), 18

Numerical optimization of quenching efficiency and particle size control in flame synthesis of ZrO[sub]2 nanoparticles

Torabmostaedi, Hosein and Zhang, Tao, 2014, Journal of Thermal Spray Technology (23), 8, pp 1478-1492

Synthesis and fabrication of NiAl coatings with Ti underlayer using induction heating

Riyadi, T.W.B., Zhang, T., Marchant, D. and Zhu, X., 2014, Surface and Coatings Technology (258), pp 154-159

Effect of nozzle geometry and processing parameters on the formation of nanoparticles using FSP

Torabmostaedi, H. and Zhang, T., 2014, Chemical Engineering Research and Design (92), 11, pp 2470-2478

Computational study of the effect of processing parameters on the formation and growth of ZrO2 nanoparticles in FSP process

Torabmostaedi, Hosein and Zhang, Tao, 2014, Chemical Engineering and Processing: Process Intensification (78), pp 1-10

Process control for the synthesis of ZrO2 nanoparticles using FSP at high production rate

Torabmostaedi, H., Zhang, T., Foot, P. J., Dembele, S. and Fernandez, C., 2013, Powder Technology (246), pp 419-433

Cure kinetics of flame-sprayed thermoset coatings

Bao, Yuqing, Gawne, David T. and Zhang, Tao, 2012, Surface and Coatings Technology (207), pp 89-95

Combustion synthesis of Ni/Al base composites

Zhu, Xiaomeng, Zhang, Tao, Marchant, Denis and Morris, Valerie, 2012, Advanced Materials Research (545), pp 50-55

Process modelling of thermal spraying for thermoset coatings

Bao, Yuqing, Zhang, Tao and Gawne, David T., 2012, Progress in Organic Coatings (73), 2-3, pp 225-231

Effect of a moving flame on the temperature of polymer coatings and substrates

Zhang, T., Bao, Y., Gawne, D.T. and Mason, P.J., 2011, Progress in Organic Coatings (70), 1, pp 45-51

The structure and properties of NiAl formed by SHS using induction heating

Zhu, X, Zhang, T., Marchant, D. and Morris, V., 2011, Materials Science and Engineering A (528), 3, pp 1251-1260

Combustion synthesis of TiC-NiAl composite by induction heating

Zhu, X., Zhang, T., Marchant, D. and Morris, V., 2010, Journal of the European Ceramic Society (30), 13, pp 2781-2790

Processing and properties of plasma sprayed silicon nitride-glass composite coatings

Liu, J., Zhang, T., Bao, Y. and Gawne, D.T., 2010, Advance in Applied Ceramics (109), 6, pp 355-361

Combustion synthesis of NiAl/Al2O3 composites by induction heating

Zhu, X., Zhang, T., Morris, V. and Marchant, D., 2010, Intermetallics (18), 6, pp 1197-1204

Plasma-scan sintering of aluminosilicate sol-gel films

Gao, J., Zhang, T., Bao, Y. and Gawne, D.T., 2010, Journal of the European Ceramic Society (30), 4, pp 847-855

Sintering behaviour of glass-silicon nitride composites for thermal spray precursor powders

Liu, J., Zhang, T., Bao, Y. and Gawne, D.T., 2010, Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment (109), 2, pp 71-78

Quantitative model for the viscous flow and composition of two-phase silicon nitride-based particles in plasma-spray deposition

Bao, Y., Zhang, T., Gawne, D.T. and Mason, P., 2009, Journal of the European Ceramic Society (29), 8, pp 1521-1528

CFD modelling of water injection for turbine blade cleaning

Yao, Jun, Yao, Yufeng, Mason, Peter, Zhang, Tao, Heyes, F. J. G. and Roach, P. E., 2009, Modern Physics Letters B (23), 3, pp 341-344

Effect of powder injection location on ceramic coatings properties when using plasma spray

An, Liantong, Gao, Yang and Zhang, Tao, 2007, Journal of Thermal Spray Technology (16), 5-6, pp 967-973

Computer model to simulate the random behaviour of particles in a thermal-spray jet

Karwatzki, J., Zhang, T., Bao, Y., Gawne, D.T. and Liu, B., 2006, Surface and Coatings Technology (201), 6, pp 3552-3563

Statistical analysis of the motion and heating of particles in a plasma jet

Zhang, T., Liu, B., Bao, Y. and Gawne, D.T., 2005, Plasma Chemistry and Plasma Processing (25), 4, pp 403-425

Non-steady state heating of substrate and coating during thermal-spray deposition

Zhang, T., Bao, Y. and Gawne, D.T., 2005, Surface and Coatings Technology (194), 1, pp 82-90

Modelling of plasma-particle two-phase flow using statistical techniques

Gwane, D.T., Liu, B., Bao, Y. and Zhang, T., 2005, Surface and Coatings Technology (191), 2-3, pp 242-254

Influence of composition and process parameters on the thermal spray deposition of UHMWPE coatings

Bao, Y., Zhang, T. and Gawne, D.T., 2005, Journal of Materials Science (40), 1, pp 77-85

Process model of plasma enamelling

Zhang, T., Bao, Y. and Gawne, D.T., 2003, Journal of the European Ceramic Society (23), 7, pp 1019-1026

Numerical modelling of motion and heating of particles during plasma spraying

Liu, B., Zhang, T., Bao, Y. and Gawne, D.T., 2002, Surface Engineering (18), 5, pp 350-357

Computational analysis of the influence of a substrate, solid shield and gas shroud on the flow field of a plasma jet

Gawne, D.T., Zhang, T. and Liu, B., 2002, Surface and Coatings Technology (153), 2-3, pp 138-147

Smaltatura al plasma : un nuovo processo = Plasma enamelling: a new process

Gawne, D.T., Bao, Y. and Zhang, T., 2002, (64), 1, pp 22-32

Abrasive wear resistance of plasma-sprayed glass-composite coatings

Gawne, D.T., Zhang, T. and Bao, Y., 2001, Journal of Thermal Spray Technology (10), 4, pp 599-603

Plasma enamelling: a new process

Gawne, D.T., Bao, Y. and Zhang, T., 2001, The Vitreous Enameller (52), 4, pp 6

Influence of secondary phase on residual stress of plasma sprayed glass coating

Bao, Y., Gawne, D.T., Zhang, T., Qiu, Z. and Zhang, K., 2000, Surface Engineering (16), 6, pp 473-479

Computational analysis of the influence of process parameters on the flow field of a plasma jet

Liu, B., Zhang, T. and Gawne, D.T., 2000, Surface and Coatings Technology (132), 2-3, pp 202-216

Computer modelling of the influence of process parameters on the heating and acceleration of particles during plasma spraying

Zhang, T., Gawne, D.T. and Liu, B., 2000, Surface and Coatings Technology (132), 2-3, pp 233-243

Relaxation patterns in powder injection mouldings made with repeated flow reversals

Zhang, T., Evans, J.R.G. and Bevis, M., 1999, Journal of the European Ceramic Society (19), 4, pp 411-417

On the heat balance during double-gated, modulated-pressure injection moulding

Zhang, T, Evans, JRG and Bevis, MJ, 1998, International Journal of Heat and Mass Transfer (41), 6-7, pp 963-974

The mechanism of crack formation in plasma sprayed enamel

Bao, Y., Zhang, T. and Gawne, D.T., 1998, Transactions of the Institute of Metal Finishing (76), 6, pp 213-216

The influence of process parameters on the degradation of thermally sprayed polymer coatings

Zhang, T, Gawne, DT and Bao, Y, 1997, Surfaces and Coatings Technology (96), 2-3, pp 337-344

Analysis of open-ended injection molding

Zhang, T., Evans, J.R.G. and Bevis, M., 1997, Advances in Polymer Technology (16), 2, pp 105-115

Orientation of binders and particles during ceramic injection moulding

Zhang, T., Blackburn, S. and Bridgwater, J., 1997, Journal of the European Ceramic Society (17), 1, pp 101-108

Control of orientation in short fibre-reinforced metal matrix composites

Zhang, T., Evans, J.R.G. and Bevis, M., 1996, International Journal of Powder Metallurgy (32), 4, pp 331-339

The control of fibre orientation in ceramic and metal composites by open-ended injection moulding

Zhang, Tao, Evans, J.R.D and Bevis, M., 1996, Composites Science and Technology (56), 8, pp 921-928

Debinding and sintering defects from particle orientation in ceramic injection moulding

Zhang, T., Blackburn, S. and Bridgwater, J., 1996, Journal of Materials Science (31), 22, pp 5891-5896

Injection moulding of silicon carbide using an organic vehicle based on a preceramic polymer

Zhang, T., Evans, J.R.G. and Woodthorpe, J., 1995, Journal of the European Ceramic Society (15), 8, pp 729-734

The properties of ceramic suspensions for injection moulding based on agar water solution binders

Zhang, T., Blackburn, S. and Bridgwater, J., 1994, British Ceramic Transactions (93), 6, pp 229-233

Effect of molding conditions on residual stress in powder injection molding

Kostic, B., Zhang, T. and Evans, J.R.G., 1993, International Journal of Powder Metallurgy (29), 3, pp 251 - 257

Predicting the incidence of voids in injection molding of thick ceramic sections

Zhang, T. and Evans, J.R.G., 1993, Journal of the American Ceramic Society (76), 2, pp 481-486

The solidification of large section in ceramic injection molding: II Modulated Pressure Molding

Zhang, T. and Evans, J.R.G., 1993, Journal of Materials Research (8), 2, pp 345-351

The solidification of large section in ceramic injection molding: I. Conventional molding

Zhang, T. and Evans, J.R.G., 1993, Journal of Materials Research (8), 1, pp 187-194

Computation of volume flow in modulated pressure ceramic injection moulding

Zhang, T. and Evans, J.R.G., 1993, Ceramic International (19), 6, pp 367 - 373

Relaxation effects in large injection moulded ceramic bodies

Zhang, T. and Evans, J.R.G., 1993, Journal of the European Ceramic Society (12), 1, pp 51 - 59

The use of a heated sprue in the injection moulding of large ceramic sections

Zhang, T. and Evans, J.R.G., 1993, British Ceramic Transactions (92), 4, pp 146 - 151

The measurement of residual stress in injection-molded ceramics

Kostic, B., Zhang, T. and Evans, J.R.G., 1992, Journal of the American Ceramic Society (75), 10, pp 2773-2778

Calculation of temperature distributions during the solidification stage in ceramic injection molding

Zhang, T. and Evans, J.R.G., 1992, Journal of the American Ceramic Society (75), 8, pp 2260-2267

The heating effect of electrical resistance strain gauges applied to low thermal conductivity materials

Zhang, T., Evans, J.R.G. and Rees, D.W.A., 1992, Strain (28), 3, pp 107 - 112

Mechanical properties of injection moulding suspensions as a function of ceramic volume fraction and temperature

Zhang, T. and Evans, J.R.G., 1991, Journal of the European Ceramic Society (7), 3, pp 155-163

Influence of rheology behavior of ceramic mixes on injection molding of ceramic compacts

Zhang, Tao, Jiang, Zuozhao, Wu, Jianguang and Zhengang, Chen, 1990, Journal of the American Ceramic Society (73), 7, pp 2171 - 2175

Simulation of gas water two-phase flow in diesel turbocharger

Yao, Jun, Yao, Yufeng, Mason, Peter, Zhang, Tao, Heyes, F. J. G. and Roach, P. E.(2009). In: 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (ISMF2009), 11-15 Jul 2009 :Xi'an, China

The CFD modelling of water injection flow in turbocharger

Yao, Jun, Yao, Yufeng, Mason, Peter and Zhang, Tao(2008). In: The Fifth International Conference on Computational Fluid Dynamics (ICCFD5), 7-11 July 2008 :Seoul, Korea

CFD modelling of water injection flow for turbine blades cleaning

Yao, J., Yao, Y., Mason, P.J. and Zhang, T.(2008). In: 2nd International Symposium on Physics of Fluids, 09 - 12 Jun 2008 :Nanjing, China

Computational prediction of local distorted flow in turbocharger

Yao, J., Yao, Y.F., Manson, P.J., Zhang, T., Heyes, F.J.G. and Roach, P.E.(2007). In: 5th International Conference on Fluid Mechanics, 15-19 Aug 2007 :Shanghai, Peoples Republic of China

Computational model for the prediction of the temperatures in the coating during thermal spray

Bao, Y., Zhang, T. and Gawne, D.T.(2004). In: International Thermal Spray Conference, 10-12 May 2004 :Osaka, Japan

Process optimisation of plasma spraying using statistical modelling

Zhang, T., Liu, B., Bao, Y. and Gawne, D.t.(2004). In: International Thermal Spray Conference, 10-12 May 2004 :Osaka, Japan

Model of thermal spraying using a Monte-Carlo approach

Zhang, T., Liu, B., Gawne, D.T. and Bao, Y.(2003). In: 2003 International Thermal Spray Conference, 5-8 May 2003 :Orlando, Florida, USA

Computer simulation of shrouding on the profile of a plasma jet

Zhang, T., Liu, B., Gawne, D.T. and Bao, Y.(2001). In: International Thermal Spray Conference, 28-30 May 2001 :Singapore, Singapore

Heating effect of flame impingement on polymer coatings

Gawne, D.T., Zhang, T. and Bao, Y.(2001). In: International Thermal Spray Conference, 28-30 May 2001 :Singapore, Singapore

Temperature profiles and thermal stress analysis of plasma sprayed glass-composite coatings

Zhang, T., Bao, Y. and Gawne, D.T.(2000). In: 1st International Thermal Spray Conference, 8-11 May 2000 :Montreal, Quebec, Canada

Analysis of residual stress generated during plasma spraying of glass coatings

Bao, Y., Zhang, T. and Gawne, D.T.(1998). In: 15th International Thermal Spray Conference, 25-29 May 1998 :Nice, France

Degradation of in-flight PMMA particles during thermal spraying

Gawne, D.T., Zhang, T. and Bao, Y.(1998). In: 15th International Thermal Spray Conference, 25-29 May 1998 :Nice, France